宇航计测技术

• 论文 • 上一篇    下一篇

RCS测试系统几何量参数综合校准技术研究

徐永1;孙安斌1;曹铁泽1;何小妹1;李志平2   

  1. 1、中航工业北京长城计量测试技术研究所,北京 100095;
    2、北京航空航天大学,北京 100191
  • 出版日期:2015-10-15 发布日期:2015-10-15
  • 作者简介:徐永(1974-),男,高级工程师,硕士,主要研究方向:几何量计量测试技术。

Research on Comprehensive Geometry Parameters Calibration for RCS Measurement System

XU Yong1;SUN An-bin1;CAO Tie-ze1;HE Xiao-mei1;LI Zhi-ping2   

  1. 1、Changcheng Institute of Metrology & Measurement, Beijing 100095;
    2、Beihang University, Beijing 100191
  • Online:2015-10-15 Published:2015-10-15

摘要: 本文针对RCS测试系统的计量需求,阐述了RCS测试系统几何量参数校准技术研究情况。围绕雷达反射面型面参数、设备空间几何位置参数、定标体几何参数的有限目标开展了校准技术研究,研制了RCS测试系统的几何参数综合校准系统,并在国内几个典型的RCS测试系统进行了应用验证,初步建立了RCS测试系统几何量参数量值溯源体系,为国内RCS测试系统的量值统一、数据准确打下了坚实的技术基础。

关键词: 雷达散射截面, 紧缩场, 定标体, 校准

Abstract: In this paper, it is described the research work of the geometric parameters calibration technology for RCS test system, including form parameters of radar reflector, the spatial position of equipments, the geometric parameters of scale object, and so on. A comprehensive calibration device for parameters of RCS test system is developed and applied. The value traceability system of the geometric parameters in RCS test system is initially established. It is laid a solid technical foundation for calibration of domestic RCS test system.

Key words: Radar Cross-Section (RCS), Compact antenna test range, Scale object, Calibration