宇航计测技术

• 论文 • 上一篇    下一篇

一种超低速转台速率指标的测量方法

王明元1；余海盛1；杨连春1；张新1   

  1. 、九江精密测试技术研究所，九江 332000
  • 出版日期:2013-08-15 发布日期:2013-08-15
  • 作者简介:王明元（1966-），男，高级工程师，主要研究方向：惯性技术测试设备检测技术

Measurement Method of An Ultra-Low-Speed Turntable′s Rate Index

WANG Ming-yuan1；YU Hai-sheng1；YANG Lian-chun1；ZHANG Xin1   

  1. 1、Jiujiang Institute of Precision Measurement and Testing Technology，Jiujiang 332000
  • Online:2013-08-15 Published:2013-08-15

PDF (PC)

520

摘要： 介绍一种超低速转台（0.000 01°/s ～0.000 1°/s）速率误差、速率平稳度和速率分辨力的测量方法。该测量方法采用三角测量法，其速率指标测量是通过测量出规定时间内的线位移，用相应公式计算出角速率的各项测量结果。通过实际测量和测量不确定度分析，该测量方法能满足超低速转台速率误差、速率平稳度和速率分辨力的测量要求。该测量方法不仅能解决实际工作中出现的检测问题，也有助于提高超低转速转台，特别是转速为0.000 01°/s速率转台的研制的水平。

关键词: 超低速转台, 速率, 三角测量

Abstract: The measurement method of the rate error,rate steady and the rate resolution for an ultra-low-speed turntable(0.000 01 ° / s ~ 0.000 1 ° / s) is introduced.The measurement method using the triangulation method, rate index is measured by measuring the displacement of a line within the predetermined time, the angular rate′s measurement results are calculated by corresponding formula.By actual measurement and measurement uncertainty analysis,the measurement method meets the measurement requirements of the ultra-low-speed turntable′s rate error, steady and rate resolution. This measuring method can not only solve the problem of detection in the actual work, and also helps to improve the development level of the ultralow speed turntable, in particular the speed of 0.000 01 ° / s rate table.

Key words: Ultra low speed turntable, Rate, Triangulation

京ICP备09048426号-4　 京公网安备 11010602060144号　版权所有 © 《宇航计测技术》编辑部