δ0.05mm薄钢带力学性能测试方法研究

doi:10.12060/j.issn.1000-7202.2019.02.14

宇航计测技术

δ0.05mm薄钢带力学性能测试方法研究

徐秋发¹；李东东¹；杨庆功¹；李阿妮¹；刘宗杰¹；展晓艳¹

1、中国运载火箭技术研究院，北京 100076

出版日期:2019-04-25 发布日期:2019-04-25
作者简介:徐秋发（1987-），男，博士，工程师，主要研究方向：金属腐蚀及失效分析。

Research on the Testing Method of Mechanical Properties of Thin Strip with δ0.05mm

XU Qiu-fa¹；LI Dong-dong¹；YANG Qing-gong¹；LI A-ni¹；LIU Zong-jie¹；ZHAN Xiao-yan¹

1、China Academy of Launch Vehicle Technology， Beijing 100076,China

Online:2019-04-25 Published:2019-04-25

摘要/Abstract

摘要： 研究了拉伸速率、试样类型、试样表面状态对δ0.05mm薄钢带力学性能测试的影响，通过数据对比，结果表明：拉伸速率对薄钢带的力学性能测试结果影响并不大，而试样的类型和试样的表面状态对力学性能测试结果有很大的影响；表面无缺陷的哑铃型试样可以满足检测要求，提高钢带检验一次合格率。

关键词: 薄钢带, 加工方法, 拉伸速率, 表面状态, 力学性能

Abstract: The effect of tensile rate，sample type and surface state on the mechanical properties test of thin strip with δ0.05mm ie studied. The results show that the tensile rate has little influence on the mechanical properties of the thin strip，and sample type and surface state had significant influence on the mechanical properties. Dumbbellshaped sample without defects on the surface could meet the requirements for testing and improved primary the qualification rate of thin strip.

Key words: Thin strip, Processing method, Tensile rate, Surface state, Mechanical property

徐秋发；李东东；杨庆功；李阿妮；刘宗杰；展晓艳. δ0.05mm薄钢带力学性能测试方法研究[J]. 宇航计测技术, doi: 10.12060/j.issn.1000-7202.2019.02.14.

XU Qiu-fa；LI Dong-dong；YANG Qing-gong；LI A-ni；LIU Zong-jie；ZHAN Xiao-yan. Research on the Testing Method of Mechanical Properties of Thin Strip with δ0.05mm[J]. JOURNAL OF ASTRONAUTIC METROLOGY AND MEASUREMENT, doi: 10.12060/j.issn.1000-7202.2019.02.14.

δ0.05mm薄钢带力学性能测试方法研究

Research on the Testing Method of Mechanical Properties of Thin Strip with δ0.05mm

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价