宇航计测技术 ›› 2012, Vol. 32 ›› Issue (6): 38-42.doi: 10.12060/j.issn.1000-7202.2012.06.10

• 论文 • 上一篇    下一篇

采用线性光电隔离放大技术实现模拟信号调理的过程

吴永红1;江鹏程2;武东建1;马琛1;孟翔宇1   

  1. 1、北京航天计量测试技术研究所，北京 100076;
    2、装甲兵工程学院，北京 100072
  • 出版日期:2012-12-15 发布日期:2012-12-15
  • 作者简介:吴永红（1979-），男，工程师，主要研究方向：设备故障诊断方法研究。

Regulation the Analog Signals with the Linear Photo-electric Isolate Amplification Technology

WU Yong-hong1;JIANG Peng-cheng2;WU Dong-jian1;Ma Chen1;MONG Xiang-yu1   

  1. 1、Beijing Aerospace Institute for Metrology and Measurement Technology Beijing 100076;
    2、The Academy of Armored Forces Engineering，Beijing 100072
  • Online:2012-12-15 Published:2012-12-15

PDF (PC)

被引次数

3

摘要： 在车辆底盘系统检测过程中如何对恶劣电磁环境下的车载信号实现线性隔离放大，是工程师高度重视，急需解决的问题。针对现场传感器模拟输入量实现按比例放大的需求，研发人员深入探讨，比较分析了多个方案。基于对光耦特性的分析，确定了采用参数一致的非线性光耦器件，进行电路反馈补偿的设计方案。该方案简单实用，性价比高，线性度好，抗干扰能力强，具有较好的工程应用价值。

关键词: 非线性光耦, 光电隔离放大器, 车辆底盘, 测试系统

Abstract: In detectins the vehicle classis system, how to amplify and isolate the vehicle-mounted signals in the complex electromagetic environment is the problem which the ergineers must pay great attention to and urgently needed to solve.To counter the demand of analog input of the Field sensor to scaling up, the multiple solutions are Compared and further discussed by the researchers. Based on the analysis of photo-coupler character, the design project is determined to use Nonlinear sensor photo-coupler of the consistent parameters and circuit feedback compensation. The scheme is simple and practical, cost-effechive, good linearity, strons anti-in terference capability,and has god engineering application value.

Key words: Nonlinear photo-coupler, Photoelectric isolation amplifier, Vehicle chassis , Measurement system

京ICP备09048426号-4　 京公网安备 11010602060144号　版权所有 © 《宇航计测技术》编辑部