宇航计测技术 ›› 2020, Vol. 40 ›› Issue (2): 50-56.doi: 10.12060/j.issn.1000-7202.2020.02.09

• • 上一篇    下一篇

传动比和转速对永磁齿轮传动特性的影响研究

肖磊1,2；张海2；许宝玉1,2   

  1. 1.河南理工大学直驱电梯产业技术研究院，焦作 454000；
    2.河南理工大学机械与动力工程学院，焦作 454000
  • 出版日期:2020-04-25 发布日期:2022-03-05
  • 作者简介:肖磊（1984-），男，工学博士，主要研究方向：磁力传动、冲蚀磨损。
  • 基金资助:
    河南省煤矿机械装备工程技术研究中心开放课题（MKJXZB20200）；河南理工大学博士基金项目（B2019-33）；河南省科技攻关项目（182102210313）；焦作市重大科技专项（2016001）。

Study on the Influences of Transmission Ratio and Rotating Speed on Transmission Characteristics of Permanent Magnetic Gear

XIAO Lei1,2；ZHANG Hai2；XU Bao-yu1,2   

  1. 1.Direct Drive Elevator Industrial Technology Institute,Henan Polytechnic University,Jiaozuo 454000，China;
    2.School of Mechanical and Power Engineering,Henan Polytechnic University,Jiaozuo 454000，China
  • Online:2020-04-25 Published:2022-03-05

PDF (PC)

42

摘要： 介绍了一种径向调制永磁齿轮，运用有限元技术，通过变更仿真条件中的传动比和转速，并对仿真结果中的输出转矩和传动效率进行分析，从而获得传动比和转速对输出转矩和传动效率的影响规律。结果表明，随着传动比的增大，输出转矩呈二次曲线规律变化，而传动效率则呈减小趋势；相同传动比下，随着主动转子转速的增大，输出转矩和传动效率均呈减小趋势；提出了以传动效率〖WTBX〗η〖WTBZ〗为目标值的等效率曲线概念，得到了η=90%时的等效率曲线i~n1（i和n1分别代表传动比和主动转子转速），当n1和i的交点位于等效率曲线下方时，即可满足η>90%。

关键词: 永磁齿轮, 传动比, 转速, 输出转矩, 效率

Abstract: A radial modulating Permanent Magnetic Gear(PMG) is introduced.In order to obtain the influences of the transmission ratio and the rotating speed on the output torque and the efficiency of the PMG,Finite Element Analysis(FEA)was applied by changing the simulation conditions of the transmission ratio and the rotating speed,as well as by analyzing the simulation results of the output torque and the efficiency.The results showed that the output torque varied with the transmission ratio in a quadratic manner,the efficiency decreased with increase of the transmission ratio.Under the same transmission ratio,both the output torque and the efficiency decreased with increase of the input rotating speed.The concept of equi-efficiency curve with transmission ratio(i) versus input rotating speed(n1)is proposed,the curve of the efficiency(η=90%)is given,if the crosspoint of n1 and i locates below the curve,efficiency(η>90%) could be obtained.

Key words: Permanent magnetic gear, Transmission ratio, Rotating speed, Output torque, Efficiency

中图分类号: 

京ICP备09048426号-4　 京公网安备 11010602060144号　版权所有 © 《宇航计测技术》编辑部