宇航计测技术

• 论文 • 上一篇    下一篇

基于轴角转换芯片AD2S1210的圆感应同步器信号处理方法研究

张新磊1;唐声权1;刘丽艳1;高扬1   

  1. 1、北京航天计量测试技术研究所,北京 100076
  • 出版日期:2013-08-15 发布日期:2013-08-15
  • 作者简介:张新磊(1975-),男,高级工程师,主要研究方向:惯导测试设备及运动仿真设备控制系统研究。

Reseach on the Arithmetic of Circular Inductosyn Signal Based on the AD2S1210

ZHANG Xin-lei1;TANG Sheng-quan1;LIU li-yan1;GAO Yang1   

  1. 1、Beijing Aerospace Institute for Metrology and Measurement,Beijing 100076
  • Online:2013-08-15 Published:2013-08-15

摘要: 设计了一套用于圆感应同步器测角系统的信号处理算法,并详述了其过程。在测角系统对感应同步器信号的解算中,该方法仅通过对轴角转换芯片AD2S1210输出的数字信号进行纯软件分析和处理来获得角位置信号的整数值。从而简化了测角系统的硬件电路,提高了测角实时性。

关键词: 测角系统, 模数转换, 信号处理, 算法

Abstract: An Arithmetic of Angular measurement systerm of Inductosyn signal is designed,and it be detailed. When goniometric systerm began to work ,the method gived a software solution to get the integer angle value ,which just parsed the data that converted form inductosyn signal by AD2S1210. As a result ,the method predigested the hardware circuit of goniometric systerm and enhanced the  goniometric realtime ability.

Key words: Angular measurement systerm, Anolog-digit convert, Signal processing, Arithmetic