宇航计测技术

• 论文 • 上一篇    下一篇

多种互瞄条件下立方镜准直传递方法研究

杨振1;李广云1;范百兴1;任春珍2   

  1. 1、解放军信息工程大学地理空间信息学院 ,郑州 450052;
    2、北京卫星环境工程研究所,北京 100094
  • 出版日期:2013-12-15 发布日期:2013-12-15
  • 作者简介:杨振(1981-),男,在读博士,讲师,主要研究方向:精密工程测量研究。
  • 基金资助:
    国家自然科学基金资助项目(41101446)

Cubic Prism Collimation Vector Delivery Methods under Various Aiming Conditions

YANG Zhen1;LI Guang-yun1;FAN Bai-xing1;REN Chen-zhen2   

  1. 1、Institute of Surveying and Mapping, Information Engineering University, Zhengzhou 450052;
    2、Beijing Satellite Environment Engineering Research Institute, Beijing 100094
  • Online:2013-12-15 Published:2013-12-15

摘要: 根据立方镜相对姿态测量时不同的互瞄通视条件,介绍了有互瞄传递条件下和无互瞄传递条件下经纬仪对立方镜的准直传递方法。通过对多种传递路线的分析,研究了各种条件下建立统一角度传递基准的方法,推导了自准直角度的传递公式,实现了在多种互瞄条件下立方镜相对姿态测量。

关键词: 立方镜, 经纬仪, 准直, 互瞄条件

Abstract: Introduces collimation vector delivery methods to measure cubic prism’s relative pose based on different aiming conditions, including intervisible and invisible conditions. Researches methods of establishing a unified angle delivery datum under various conditions according to analyzing the different routes. Some formulas of collimation vector delivery are derived, and relative pose measurement of cubic prism is achieved.

Key words: Cubic prism, Theodolite, Collimation, Aiming conditions