宇航计测技术

• 论文 • 上一篇    下一篇

基于北斗GEO卫星双频观测值连续监测电离层延迟

赵坤娟1,2,3;杨旭海1,2;杨海彦1,2;闫温合1,2;李伟超1,2   

  1. 1、中国科学院国家授时中心,西安710600;
    2、中国科学院精密导航定位与定时技术重点实验室,西安710600;
    3、中国科学院大学,北京100039
  • 出版日期:2018-08-25 发布日期:2018-08-25
  • 作者简介:赵坤娟(1986-),女,博士,主要研究方向:高精度时间同步与卫星导航技术。
  • 基金资助:
    中国科学院“西部青年学者”——太阳活动的电离层TEC响应特征研究(XAB2017B11)。

Ionospheric Delay Continuous Monitoring Based on BDS GEO Satellites Dual Frequency Observations

ZHAO Kun-juan1,2,3;YANG Xu-hai1,2;YANG Hai-yan1,2;YAN Wen-he1,2;LI Wei-chao1,2   

  1. 1、National Time Service Center, Chinese Academy of Sciences, Xi’an 710600, China;
    2、Key Laboratory of Precise Positioning and Timing Technology, Chinese Academy of Sciences, Xi’an 710600, China;
    3、University of Chinese Academy of Sciences, Beijing 100049,China
  • Online:2018-08-25 Published:2018-08-25

摘要: 利用北斗GEO卫星观测数据直接计算电离层延迟。由于GEO卫星具有固定穿刺点和静地的特性,使得观测站监测电离层变化时可不考虑空间变化,并可进行连续不间断监测。通过分析北斗GEO卫星三种频率码伪距和载波相位观测值不同组合,选取B1&B2双频计算电离层延迟为最优组合,采用相位平滑伪距的方法计算电离层延迟TEC,相较其他电离层模型,该方法的优点是不会引入模型误差,可得到连续的高精度的电离层延迟监测结果。

关键词: 北斗系统GEO, 电离层延迟, 双频观测值, 相位平滑伪距

Abstract: A method for using observation data of BDS GEO satellites calculate ionospheric delay is proposed. Because GEO satellites working with fixed Ionospheric Pierce Point and stationary to the ground, it cannot take into account the spatial variation when uninterrupted monitoring the ionosphere change. B1&B2 dual-frequency combination is optimal through analysis of different combinations of BDS three frequencies pseudo-range and carrier-phase observation.Compared to other ionospheric model, carrier-phase smoothed pseudo-range calculation TEC can get high precision continuous monitoring results.

Key words: BDS GEO, Ionospheric delay, Double-frequency observations, Carrier phase smoothed pseudo-range