宇航计测技术 ›› 2015, Vol. 35 ›› Issue (1): 76-78.doi: 10.12060/j.issn.1000-7202.2015.01.16

• 论文 • 上一篇    

气相色谱法测定玻璃纤维增强不饱和聚酯树脂塑料中残留苯乙烯单体的含量

侯倩倩1；刘志娟1；许峰1；张文申1；刘霞1；荀其宁1；冀克俭1   

  1. 1、中国兵器工业集团第五三研究所，济南 250031
  • 出版日期:2015-02-15 发布日期:2015-02-15

Determination of Residual Styrene Monomer Content in Fiberglass Reinforced Plastics based on #br# Unsaturated-polyester Resins

HOU Qian-qian1；LIU Zhi-juan1；XU Feng1；ZHANG Wen-shen1；LIU Xia1；XUN Qi-ning1；JI Ke-jian1   

  1. 1、CNGS Institute 53, Jinan 250031
  • Online:2015-02-15 Published:2015-02-15

PDF (PC)

摘要： 采用气相色谱法火焰离子检测器（FID）测定玻璃纤维增强不饱和聚酯树脂塑料中苯乙烯残留单体含量，用二氯甲烷提取苯乙烯，使用毛细管柱（HP-5），以内标法（正丁苯为内标物）定量，内标法标准曲线线性关系良好，线性相关系数为0.999 7。加样回收率得到满意结果，最低检测限可达5mg/kg。

关键词: 气相色谱法, +玻璃纤维增强不饱和聚酯树脂塑料, 苯乙烯

Abstract: An analytical method was developed for the determination of the residual styrene monomer content in fiberglass reinforced plastics based on unsaturated-polyester resins by gas chromatography with FID detector. In this method, dichloromethane is used as the solvent, and HP-5 column is used to separate different components. The internal standard calibration method is used for the quantitative calculations, the linear correlation coefficient was 0.999 7. The detection limit of the method is 5mg/kg.

Key words: Gas chormatography, +Fiberglass reinforced plastics based on unsaturated-polyester resins, Styrene

京ICP备09048426号-4　 京公网安备 11010602060144号　版权所有 © 《宇航计测技术》编辑部