宇航计测技术

• 论文 • 上一篇    下一篇

抗振晶体振荡器的仿真设计

唐元贵1;韩艳菊2;彭慧丽2;乔志峰2   

  1. 1、中国航天科工集团第二研究院,北京100039;
    2、北京无线电计量测试研究所,北京100039
  • 出版日期:2016-02-15 发布日期:2016-02-15
  • 作者简介:唐元贵(1990-),男,工程师,主要研究方向:晶体振荡器设计。

Simulation Design of Antivibration Crystal Oscillator

TANG Yuan-gui1;HAN Yan-ju2;PENG Hui-li2;QIAO Zhi-feng2   

  1. 1、The Second Academy of China Aerospace Science and Industry Corp, Beijing 100039;
    2、Beijing Institute of Radio Metrology and Measurement, Beijing 100039
  • Online:2016-02-15 Published:2016-02-15

摘要: 本文介绍了利用仿真软件进行抗振晶体振荡器设计的方法,通过建立晶体振荡器结构仿真模型,对其力学特性进行深入细致的分析,并在此基础上对比分析减振材料的剪切模量和被减振物质量对晶体振荡器抗振性能的影响,优化晶体振荡器减振结构。然后,根据仿真设计制做了抗振晶体振荡器,并进行了随机振动试验。结果表明,试验现象与仿真结果基本一致,验证了仿真分析的有效性,且振动下晶体振荡器相位噪声达到-145dBc/Hz@1kHz,极大地提高了晶体振荡器的抗振性能。

关键词: 晶体振荡器, 抗振, 仿真设计

Abstract: An anti-vibration crystal oscillator design method using simulation software is introduced in this paper. The crystal oscillator mechanical properties were analysed deeply and in detail by establishing the simulation model for the crystal oscillator structure. On this basis, the influences of the damping material’s shear modulus and the vibration reduced object’s quality on the crystal oscillator anti-vibration performance were contrastively analyzed, and the crystal oscillator anti-vibration structure was optimized.The antivibration crystal oscillators were made according to the simulation design, and the random vibration tests were carried out. The results showed that the experiment phenomena were basically coincident with the simulation results, testifying the validity of the simulation analysis. The crystal oscillator phase noise under vibration reached -145dBc/Hz @1kHz to improve the crystal oscillator antivibration performance obviously.

Key words: Crystal oscillator, Anti-vibration, Simulation design