宇航计测技术 ›› 2022, Vol. 42 ›› Issue (1): 24-28.doi: 10.12060/j.issn.1000-7202.2022.01.05

• 量值传递技术 • 上一篇    下一篇

非接触式静电电压测量仪校准方法研究

张时开1,张宇青2,李玉玲1,李俊箫1,张琳轶1   

  1. 1.北京振兴计量测试研究所，100074；2.北京控制与电子技术研究所，北京 100038
  • 出版日期:2022-02-25 发布日期:2022-04-30
  • 作者简介:张时开（1988-），女，工程师，硕士，主要研究方向：电磁学计量技术。

Research on Calibration Method of Non-contact Electrostatic Voltage Measuring Instrument

ZHANG Shi-kai1,ZHANG Yu-qing2,LI Yu-ling1,LI Jun-xiao1,ZHANG Lin-yi1   

  1. 1.Beijing zhenxing institute of metrology and measurmeat,Beijing 100074,China;2.Beijing Institute of control and electronic technology,Beijing 100038,China
  • Online:2022-02-25 Published:2022-04-30

PDF (PC)

270

摘要： 根据非接触式静电电压测量仪的工作原理，建立了一套非接触式静电电压测量仪校准系统。重点介绍了校准系统的组成和工作过程，以及决定校准系统测量准确度关键因素的标准平板电极的设计原则，并通过实验数据分析了标准平板电极的直径和边缘效应对测量结果的影响。最后以常用的非接触式静电电压测量仪EST101为例，根据校准装置测量不确定度主要来源，对校准结果进行不确定度分析，验证了此套校准系统满足校准要求。

关键词: 非接触式静电电压测量仪, 标准平板电极, 不确定度分析

Abstract: According to the working principle of the non-contact electrostatic voltage measuring instrument,a calibration system of the non-contact electrostatic voltage measuring instrument is established.The composition and working process of the calibration system,as well as the design principles of the standard plate electrode,which are the key factors for the measurement accuracy of the calibration system,are mainly introduced.Finally,taking the commonly used non-contact electrostatic voltage measuring instrument EST101 as an example,according to the main source of measurement uncertainty of the calibration device,the uncertainty analysis of the calibration results is carried out,and it is verified that the calibration system meets the calibration requirements.

Key words: Non-contact electrostatic voltage measuring instrument, Standard plate electrode, Uncertainty analysis

中图分类号: 

京ICP备09048426号-4　 京公网安备 11010602060144号　版权所有 © 《宇航计测技术》编辑部