A calibration method for bolt tensioners is presented. According to the theory of Newton′s Third  Law, the calibration device is researched and designed to calibrate the bolt tensioners. The measurement error and repeatability analysis and uncertainty evaluation show the linearity is good. Considering the measurement error is within ±1%, which meets the calibration requirements for bolt tensioners, the designed calibration device is capable to carry out the calibration work for bolt tensioners.

doi:10.12060/j.issn.1000-7202.2015.04.09

JOURNAL OF ASTRONAUTIC METROLOGY AND MEASUREMENT ›› 2015, Vol. 35 ›› Issue (4): 40-43.doi: 10.12060/j.issn.1000-7202.2015.04.09

Previous Articles Next Articles

A calibration method for bolt tensioners is presented. According to the theory of Newton′s Third Law, the calibration device is researched and designed to calibrate the bolt tensioners. The measurement error and repeatability analysis and uncertainty evaluation show the linearity is good. Considering the measurement error is within ±1%, which meets the calibration requirements for bolt tensioners, the designed calibration device is capable to carry out the calibration work for bolt tensioners.

ZHAO Xing-liang¹；YANG Si-fan¹；LI Wei¹；CHEN Bao-you¹

1、Beijing Aerospace Institute for Metrology and Measurement Technology, Beijing 100076

Online:2015-08-15 Published:2015-08-15

Abstract

ZHAO Xing-liang；YANG Si-fan；LI Wei；CHEN Bao-you. A calibration method for bolt tensioners is presented. According to the theory of Newton′s Third Law, the calibration device is researched and designed to calibrate the bolt tensioners. The measurement error and repeatability analysis and uncertainty evaluation show the linearity is good. Considering the measurement error is within ±1%, which meets the calibration requirements for bolt tensioners, the designed calibration device is capable to carry out the calibration work for bolt tensioners.[J]. JOURNAL OF ASTRONAUTIC METROLOGY AND MEASUREMENT, 2015, 35(4): 40-43.

[1]	QIAN Fei, XU Su'an, GAO Chenhao, YAN Bingnan, MA Yikai, YAN Tian. Research on Measurement Standard of Offshore Static Cone Penetrometer and Uncertainty Evaluation [J]. Journal of Astronautic Metrology and Measurement, 2024, 44(2): 1-8.
[2]	BAO Shanying, MENG Xianli, WANG Liling, GAO Qun. Research on Calibration Method of Limit Travel Sensor of Centrifugal Test Bench for Rotor Hub Based on Precision Laser Ranging Technology [J]. Journal of Astronautic Metrology and Measurement, 2024, 44(2): 9-13.
[3]	GUO Weiwang, YANG Jian, LIU Hai, LIU Zhigang, WANG Qiang, CUI Xiwei, KANG Zhizeng, LIU Yan. Development of High Temperature and High Pressure Ultrasonic Flowmeter and Uncertainty Evaluation [J]. Journal of Astronautic Metrology and Measurement, 2024, 44(2): 25-30.
[4]	CHANG Wei, WEN Hai, WU Yingfa. A Method to Timing Errors Range Calibrating of Electronic Stopwatch [J]. Journal of Astronautic Metrology and Measurement, 2024, 44(1): 61-65.
[5]	DING Guo, GUO Sheng, ZHU Jing-hua, DENG Peng-bo. Theoretical Background of Quantum Metrology [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(6): 44-48.
[6]	ZHU Gang, TIAN Jun-hong, DAI Yi-lin, LIU Peng, YANG Xiao-wei. Evaluation of Measurement Uncertainty for Vibration Transducers Calibration in Fixed Temperature#br# [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(6): 49-52.
[7]	LI Yong-gang, WANG Chun-xi, ZHOU Yu-tang, WANG lei, ZHANG Zhong-wu. A Calibration Method of Device Attitude Angle Relation in Condition of Moving Base#br# [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(6): 53-58.
[8]	LIU Yan, WEI Hua-tong, BAI Tian, WANG Feng-ning, REN Da-cheng, LIU Li, CUI Xi-wei, GUO Lin. Method for Analyzing Uncertainty of High Precision Ultrasonic Flowmeter for Main Feedwater [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(4): 1-7.
[9]	ZHANG Jun-qi, LI Chen-yuan, LIU Bao-ju, ZHOU Ming-rui, WU Wei-wei, ZHAO Hua-ye, LIU Xin. Development and Uncertainty Analysis of Heat Flow Field Calibration Device [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(4): 8-12.
[10]	LI Jian-jun, HU You-bo, DING Lei, ZHAI Wen-chao, XIA Mao-peng, ZHENG Xiao-bing. Measurement Uncertainty Analysis of Spectral Irradiance of Self-calibration Spectral Irradiance Meter [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(3): 40-46.
[11]	ZHANG Ping, MAO Li-yong, MA Yi-wei, ZHENG Han-zhi. Research on Automatic Calibration Software for Various Types S Parameter of Microwave Devices based on Network Analyzer [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(3): 66-71.
[12]	KOU Qiong-yue, ZHOU Jian-tong, ZHOU Rui. Uncertainty Evaluation of Field Calibration and Measurement Results of Security Monitoring System’s Pressure Parameters [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(2): 27-31.
[13]	HUO Ye, WU Ai-hua, WANG Yi-bang, LUAN Peng, LIU Chen, LIANG Fa-guo, DU Jing. Research on Measuring Method of Horizontal Displacement of the Chuck for Automatic and Semi-automatic Probe Platform [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(1): 30-33.
[14]	SHEN Xiao-qing, LI Shi-guang, LI Da-zhen, WANG Chao, WANG Zhi-hu, QIU Bin, YU Qing-hua, XIA Wei. Research on Field Calibration Technology of Time Code [J]. Journal of Astronautic Metrology and Measurement, 2023, 43(1): 34-39.
[15]	BAI Tian, YAN Lei, TIAN Jun-hong. Design and Calibration of Acoustic Sensor of Particle Impact Noise Detector [J]. Journal of Astronautic Metrology and Measurement, 2022, 42(6): 22-27.

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments