一种CS115/CS116电流监测探头时域校准夹具的设计

doi:10.12060/j.issn.1000-7202.2017.05.06

宇航计测技术

一种CS115/CS116电流监测探头时域校准夹具的设计

董佳¹；姚利军¹；余璨译¹

1、北京无线电计量测试研究所，北京 100039

出版日期:2017-10-25 发布日期:2017-10-25

Design of Calibration-jig Using in CS115/CS116 Current Monitor Probe Time-domain Calibration

DONG Jia¹；YAO Li-jun¹；YU Can-yi¹

1、Beijing Institute of Radio Metrology and Measurement, Beijing 100039, China

Online:2017-10-25 Published:2017-10-25

摘要/Abstract

摘要： 本文介绍了一种用于CS115/CS116电流监测探头时域校准的夹具。通过分析CS115/CS116瞬态脉冲信号的时域特性和频域特性，确定了校准夹具的工作带宽，利用CST软件仿真设计了满足CS115/CS116实验波形传输的校准夹具。通过实际测量，在500MHz范围内校准夹具的电压驻波比VSWR<2，可以用于电流探头时域转换系数的校准。

关键词: 校准夹具, 时域测量, 电流探头

Abstract: The design method of calibration-jig using in CS115/CS116 Current monitor probe time-domain calibration is introduced. By analyzing the time and spectral domain property of CS115/CS116 signal， we know the bandwidth of the calibration-jig， and we simulate the calibration-jig in CST. The design method is verified by measurement， the VSWR of the jig is less than 2 within 500MHz.

Key words: Calibration-jig, Time-domain measurement, Current probe

董佳；姚利军；余璨译. 一种CS115/CS116电流监测探头时域校准夹具的设计[J]. 宇航计测技术, doi: 10.12060/j.issn.1000-7202.2017.05.06.

DONG Jia；YAO Li-jun；YU Can-yi. Design of Calibration-jig Using in CS115/CS116 Current Monitor Probe Time-domain Calibration[J]. JOURNAL OF ASTRONAUTIC METROLOGY AND MEASUREMENT, doi: 10.12060/j.issn.1000-7202.2017.05.06.

一种CS115/CS116电流监测探头时域校准夹具的设计

Design of Calibration-jig Using in CS115/CS116 Current Monitor Probe Time-domain Calibration

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价